MFMC MTCA.4 FMC Carrier Module
The MFMC module is a general purpose FMC carrier module dedicated for MTCA.4 systems. The module is designed for high performance data acquisition and data processing applications.
- FMC carrier with HPC and LPC connectors
- Powerful cost-effective Xilinx Artix-7 FPGA
- SDRAM DDR3 memory (up to 16 Gb) with 64 bits data bus
- RTM Zone 3 connector (D1.2 digital class)
- PCIe x4 gen. 2 (20 Gbps)
- Configurable VADJ for both FMC slots
- Peer-to-Peer connectivity (6.6 Gbps) on MTCA backplane (ports 8-15)
- 4 Multi Gigabit Transceiver channels to RTM (6.6 Gbps)
- 4 Multi Gigabit Transceiver channels to HPC connector (6.6 Gbps), 2 configurable clocks, 56 LVDS pairs
- 1 Multi Gigabit Transceiver channel to LPC connector (6.6 Gbps), 2 configurable clocks, 32 LVDS pairs
- Flexible clock distribution circuit with PLL and PTP support
- PCIe x4, gen. 2 endpoint
- Registers block avilable via PCIe with R/W access
- DDR3 controller with R/W access via PCIe (not DMA transfers)
- Pre-compiled binary file for Artix 7 FPGA (bit/mcs)
- Reference clock configuration according to agreed specification
- Python script for reading reagisters and DDR3 using /sys/bus/pci nodes.
- PCIe x4, gen. 2 endpoint
- Registers block avilable via PCIe with R/W access
- DDR3 controller with R/W access via PCIe (not DMA transfers)
- Pre-compiled binary file for Artix 7 FPGA (bit/mcs)
- Reference clock configuration according to agreed specification
- Simple Linux driver for CentOs7, Kernel 3.10.0.
In order to buy contact office@aies.pl
MFMC-DEMO-LINUX-PYT
Demonstration project for the MFMC carrier module for Vivado 2018.2 including:
In order to buy contact office@aies.pl
MFMC-DEMO-LINUX-DRV
Demonstration project for the MFMC carrier module for Vivado 2018.2 including:
In order to buy contact office@aies.pl
MicroTCA. 4 PCI Express 4x to external CPU
The PCI Express optical link is composed of AI-9194 host card, MPCIE4-T2 target card, NAT-MCH-PHYS80 Module Carrier Hub and 4 fiber optical cables.
- Provides a PCIe link between MicroTCA.4 chassis and external CPU
- PCIe gen. 2, 4 lanes (4x 4 Gbps = 16 Gbps net)
- PCIe clock separation between root complex (CPU) and target (MicroTCA)
- PCIe link length: max. 300 m optical fibre
- Fibre type: multimode fibre (850 nm) with LC terminals
- SFP modules: SFP+ type suitable for 5 Gbps transmission (5-8 Gbps)
- Form factor:
- AMC module management according to IPMI 2.0, PICMG 1.5 and MicroTCA.0/MicroTCA.4
- PC mid-size card with PCIe x4 connector
- Reference clock:
- PCIe switch should supports clk domain separation
- MicroTCA.4 PCIe non-SSC clock f=100 MHz
- Operates with NAT MCH (NAT-MCH-PHYS)
In order to buy contact office@aies.pl
Camera Link FMC Module
The FMC-CL is a Camera Link interface module designed as a FMC card with LPC connector. The module supports all configurations of Camera Link interface (Base, Medium, Full and Extended-Full) or two separate Base Camera Link interfaces.
- FMC Vita 57.1 Compliant, Low Pin Count Connector
- Base, Medium, Full, Extended and Dual Base
- Configurations of Camera Link
- PoCL v1.2 support
- Acquisition pixel clock rates up to 85 MHz
- Supports all Camera Link bit assignment configurations
- Temperature Range: 0°C to 55°C
- Air Cooled
- FMC Vadj = 2.5 V, 1 A max.
- FMC 12V0P 800 mA (~400 mA per camera PoCL output, dual config)
In order to buy contact office@aies.pl
Optical MXI-Express Link for NI the CompactRIO
The optical MXI-Express link (AI-9193 and AI-9194) is ideal for connecting the Compact RIO chassis installed in a distance from the host computer using the optical fiber
- Data Rate up to 256 MB/s
- Supports PCIe x1, gen. 1
- No additional drivers or software needed
- Dedicated to NI CompactRIO
- Long distance (up to 1000 m) SFP LC-LC Optical Cable
- MXI-Express connection to the cRIO chassis via a copper cable
In order to buy contact office@aies.pl
MPCIe16-H3
The MPCIE16-H3 card is dedicated to the high-throughput PCIe connectivity. It is designed to operate with a MPCIE16-T3 Target card. The PCIe host card supports the PCIe x4, x8 or x16 link.
- Data transfer up to 128 Gb/s (Gen 3)
- Supports PCIex16 Gen 2 / Gen 3
- No additional drivers or software needed
- Dedicated to optical fiber and cooper link
In order to buy contact office@aies.pl
MPCIE16-T3
The MPCIE16-T3 is a double-width, mid-size RTM PCIe target cable adapter dedicated for MTCA.4 systems using the NAT-MCH-PHYS80 MicroTCA Carrier Hub.
- Data transfer up to 128 Gb/s (Gen 3)
- Supports PCIex16 Gen 2 / Gen 3
- No additional drivers or software needed
- Dedicated to optical fiber and cooper link
- Rear Transition Module
- PICMG MTCA.4
- Double-Width (board dimensions: 180.6 x 148.5 mm)
- Full-Size faceplate (MS available as option)
In order to buy contact office@aies.pl
CPU link
The MPCIE16-H3 and MPCIE16-T3 allows connecting the PCIe switch of the MCH to an external CPU working as a Root Complex using the PCIe cable (fiber or cooper).
- Data transfer up to 128 Gb/s (Gen 3)
- Supports PCIex16 Gen 2 / Gen 3
- No additional drivers or software needed
- Dedicated to optical fiber and cooper link
Typical Applications:
- Data Acquisition and Control Systems
- Telecommunication
- Image Acquisition and Processing Systems
- High Performance Computing
In order to buy contact office@aies.pl